Area Outlines
ProMaps.AreaOutlines History
Hide minor edits - Show changes to output
Changed line 5 from:
%newwin width=500% [[ http://www.seedcode.com/rootimages/stikipad/promaps2/mapareas.jpg | http://www.seedcode.com/rootimages/stikipad/promaps2/mapareas.jpg]]
to:
%newwin width=500% [[ http://archive.seedcode.com/rootimages/stikipad/promaps2/mapareas.jpg | http://archive.seedcode.com/rootimages/stikipad/promaps2/mapareas.jpg]]
November 14, 2022, at 09:42 PM
by - Added note that your outline should start with the same point it ends with
Added lines 25-27:
47.733897,-122.374735 \\
Note that your last point should be the same as your first point if you want the polygon to be closed.
Note that your last point should be the same as your first point if you want the polygon to be closed.
Changed lines 40-42 from:
https://vimeo.com/346630050
<iframe src="https://player.vimeo.com/video/346630050" width="640" height="360" frameborder="0" allow="autoplay; fullscreen" allowfullscreen></iframe>
<iframe src
to:
%newwin% [[https://vimeo.com/346630050]]
(:vimeo 346630050 width=500:)
(:vimeo 346630050 width=500:)
Changed line 42 from:
to:
<iframe src="https://player.vimeo.com/video/346630050" width="640" height="360" frameborder="0" allow="autoplay; fullscreen" allowfullscreen></iframe>
Added lines 35-40:
!! Making Lots of Areas
If you need to make lots of area borders, you may not want to have to leave FileMaker every time to do it. We can customize ProMaps so that you can alter borders right inside the app. Here's an overview; contact us for details.
https://vimeo.com/346630050
Changed lines 38-40 from:
For the truly geeky, there is a way to get these coordinates using the Twitter API. This *could* be used to grab coordinates for specific city names though the lat / long would still need to be transposed.
to:
For the truly geeky, there is a way to get these coordinates using the Twitter API. This *could* be used to grab coordinates for specific city names though the lat / long would still need to be transposed.
We've also made customizations to automatically calculate the area (or neighborhood) for a given address. This mod works in FileMaker client and in WebDirect. %newwin% [[https://www.seedcode.com/contact | Contact ius]] for details.
We've also made customizations to automatically calculate the area (or neighborhood) for a given address. This mod works in FileMaker client and in WebDirect. %newwin% [[https://www.seedcode.com/contact | Contact ius]] for details.
Changed line 5 from:
%newwin% %width=500% [[ http://www.seedcode.com/rootimages/stikipad/promaps2/mapareas.jpg | http://www.seedcode.com/rootimages/stikipad/promaps2/mapareas.jpg]]
to:
%newwin width=500% [[ http://www.seedcode.com/rootimages/stikipad/promaps2/mapareas.jpg | http://www.seedcode.com/rootimages/stikipad/promaps2/mapareas.jpg]]
Changed line 5 from:
%width=500% %newwin% [[ http://www.seedcode.com/rootimages/stikipad/promaps2/mapareas.jpg | http://www.seedcode.com/rootimages/stikipad/promaps2/mapareas.jpg]]
to:
%newwin% %width=500% [[ http://www.seedcode.com/rootimages/stikipad/promaps2/mapareas.jpg | http://www.seedcode.com/rootimages/stikipad/promaps2/mapareas.jpg]]
Changed line 5 from:
%width=500px% %newwin% [[ http://www.seedcode.com/rootimages/stikipad/promaps2/mapareas.jpg | http://www.seedcode.com/rootimages/stikipad/promaps2/mapareas.jpg]]
to:
%width=500% %newwin% [[ http://www.seedcode.com/rootimages/stikipad/promaps2/mapareas.jpg | http://www.seedcode.com/rootimages/stikipad/promaps2/mapareas.jpg]]
Changed line 5 from:
%width=500% %newwin% [[ http://www.seedcode.com/rootimages/stikipad/promaps2/mapareas.jpg | http://www.seedcode.com/rootimages/stikipad/promaps2/mapareas.jpg]]
to:
%width=500px% %newwin% [[ http://www.seedcode.com/rootimages/stikipad/promaps2/mapareas.jpg | http://www.seedcode.com/rootimages/stikipad/promaps2/mapareas.jpg]]
Changed line 5 from:
%rfloat% http://www.seedcode.com/rootimages/stikipad/promaps2/mapareas
to:
%width=500% %newwin% [[ http://www.seedcode.com/rootimages/stikipad/promaps2/mapareas.jpg | http://www.seedcode.com/rootimages/stikipad/promaps2/mapareas.jpg]]
Changed line 5 from:
%rfloat% http://www.seedcode.com/rootimages/stikipad/GoMaps/areas.png
to:
%rfloat% http://www.seedcode.com/rootimages/stikipad/promaps2/mapareas
Changed line 5 from:
%rfloat% http://www.seedcode.com/rootimages/stikipad/ProMaps/areas.png
to:
%rfloat% http://www.seedcode.com/rootimages/stikipad/GoMaps/areas.png
Changed lines 26-27 from:
You'll want to use GoogleMaps' online tools to construct the coordinates for each area you'd like to use in ProMaps. Follow the instructions below and you'll end up with a series of coordinates you can paste into the areas' Boarder Coordinates in ProMaps.
to:
You'll want to use GoogleMaps' online tools to construct the coordinates for each area you'd like to use in ProMaps. Follow the instructions below and you'll end up with a series of coordinates you can paste into the areas' Border Coordinates in ProMaps.
Changed line 32 from:
'''3.''' Please note that the kml format flips the order of latitude and longitude so you will need to reverse the numbers before pasting them into ProMaps areas. ProMaps uses the format of "latitude,longitude" with a comma separator, no space. This is kind of tedious, but you on need to do it once per area.
to:
'''3.''' Please note that the kml format flips the order of latitude and longitude so you will need to reverse the numbers before pasting them into ProMaps areas. ProMaps uses the format of "latitude,longitude" with a comma separator, no space. This is kind of tedious, but you only need to do it once per area.
Changed lines 5-6 from:
%lfloat% http://www.seedcode.com/rootimages/stikipad/ProMaps/areas.png
to:
%rfloat% http://www.seedcode.com/rootimages/stikipad/ProMaps/areas.png
Changed lines 5-6 from:
to:
%lfloat% http://www.seedcode.com/rootimages/stikipad/ProMaps/areas.png
Changed lines 3-4 from:
Each "area" in ProMaps can have a border shown on the map. "Areas" are the categories listed on the left side of ProMaps when it's in Horizontal orientation.
to:
Each "area" in ProMaps can have a border shown on the map. "Areas" are the categories listed on the left side of ProMaps, when it's in Horizontal orientation, and from the drop down list at the top of the screen in vertical orientation.
Added lines 34-38:
Note that if you end up with a very long list of values you need to transpose (need to switch the order of), you can use the script "Transpose Lat / Long" in ProMaps' "Developer" scripts folder. Read the script comments for instructions.
!! Going further
For the truly geeky, there is a way to get these coordinates using the Twitter API. This *could* be used to grab coordinates for specific city names though the lat / long would still need to be transposed.
!! Going further
For the truly geeky, there is a way to get these coordinates using the Twitter API. This *could* be used to grab coordinates for specific city names though the lat / long would still need to be transposed.
Changed lines 28-32 from:
'''1.''' Access google maps using this url: %newwin% [[https://maps.google.com/?output=kml]]
You will need to be signed in using a google account for this to work. If you don't have a google account and don't want to create one you can use the tool at this location instead:
%newwin% [[http://www.birdtheme.org/useful/v3tool.html]]
'''2.''' In google maps once you have created your outline you can save it, then click "Done". There should be a link next to the map name titled "kml". Click on that link to download a kml text file. This file will contain the latitude on longitude coordinates for your border. Please note that the kml format flips the order of latitude and longitude so you will need to reverse the numbers before pasting them into go maps. ProMaps uses the format of "latitude,longitude" with a comma separator, no space.
to:
'''1.''' Navigate to %newwin% [[http://www.birdtheme.org/useful/v3tool.html]] and move the map center to the area you're interested in.
'''2.''' Begin clicking points to draw the border of your area. You can use "delete last point" and "edit lines" if you make a mistake. When you're done, click "show kml". You'll find the coordinates you're interested in between the <coordinates></coordinates> tags of the kml file.
'''3.''' Please note that the kml format flips the order of latitude and longitude so you will need to reverse the numbers before pasting them into ProMaps areas. ProMaps uses the format of "latitude,longitude" with a comma separator, no space. This is kind of tedious, but you on need to do it once per area.
'''2.''' Begin clicking points to draw the border of your area. You can use "delete last point" and "edit lines" if you make a mistake. When you're done, click "show kml". You'll find the coordinates you're interested in between the <coordinates></coordinates> tags of the kml file.
'''3.''' Please note that the kml format flips the order of latitude and longitude so you will need to reverse the numbers before pasting them into ProMaps areas. ProMaps uses the format of "latitude,longitude" with a comma separator, no space. This is kind of tedious, but you on need to do it once per area.