I got to the place were I can print all the record that I have found in my lay outs on the data base. But, the lay out with no found record still prints blank paper. This is the schrip I am using. What is wrong with it.

Set Error Capure(on)
If ["status (CurrentErro)<>0"]
End If

Oh!
File maker 6 is what I am using.

Set Error Capure(on)
If ["status (CurrentErro)<>0"]
End If

Your script would actually test for an error resulting from the Set Error Capture step, and that is unlikely to produce an error. =)

If you want to omit the layout with a found count of 0 test for:

Status (CurrentFoundCount) =0

Hope that helps,

John

so I need to scrip like this?

Set Error captuer(0n)
If ["Status(CourrntFoundCount")=0
End if

woo wrote:so I need to scrip like this?

Set Error captuer(0n)
If ["Status(CourrntFoundCount")=0
End if

No, I'd do something like this....

If ["Status(CourrntFoundCount")=0
ShowCustomDialog ( "There is nothing to print. I'm sorry")
Else
Print...
End if

If you're just looping through layouts and don't want to do anything when there are no records found, simply change this to...

If ["Status(CourrntFoundCount") > 0
Print...
End if

Hope that helps.

John.
Thanks it worked.