SeedCode Support Forum

Doing volunteer work installing free version of calendar for a non-profit organization. Integrating within an existing membership management system.

Month displays both start-time and no-start-time events perfectly. Week only displays events that HAVE a start time. Day only displays events WITHOUT a start time.

Also, modified script for 24 hour clock (this will eventually be a Canadian French application). Times in Event Details appear as 24 hours; however displays as am/pm in Month and Week displays.

Suggestions?

Thanks a million.

Tony

The time formats can be resolved in a script here: http://www.seedcode.com/pmwiki/pmwiki.p ... imeFormats

As for the start-times on the week and day views, that doesn't sound familiar. I'd check your timestamp calcs again and make sure they are showing the info they should be on the Source No 1 layout. Can't really think of something specific that would cause what you're seeing.

Thank you for the speedy response - am impressed. Now that I know where to go, I can modify how time displays.

Regarding timed events not showing properly...

Further testing shows that a multi-day event (e.g. over 2+ days) will properly display with correct times in all three (day-week-month) screens while a single day event will not display properly.

Let me know if that helps pinpoint the issue.

I have checked and re-checked, and actually copied calculations from a working standalone calendar. To no avail. Quite mysterious but a real show stopper.

Will sleep over it.

Thanks again.

Ah, thanks for the details. For your single day event, are you using the start date as the single day? (That is what the calendar is expecting.) If so, and it is still not adding up, feel free to email me a copy of the file (john at seedcode.com) and I'll check it out.

John Sindelar wrote:For your single day event, are you using the start date as the single day? (That is what the calendar is expecting.)

In Event Details layout, I am using DateStart and TimeStart, as expected, leaving DateEnd and TimeEnd blank. But when TimeStart has a time value, this is when the Event does not display in Day View.

When DateEnd > DateStart (multi-day), event displays properly.

I know it is something at my end as the standalone demo works fine.

Still baffled.

Tony