SeedCode Support Forum

Had the data base syncing with out any errors, while In the process of moving it to Ipad and the host to the server this error -2 is not showing up on all of my tables. The Layouts and Relationship tables are still the same. I did manual update from Gozync 4.03 to 4.52

Any clue what may have been happen?


0:00:00 - 0:00:41 - STARTING CLIENTS ROUND TRIP

0:00:00 - 0:00:41 - Starting Push
0:00:00 - 0:00:41 - Starting to Push "gzm_Clients"
0:00:00 - 0:00:41 - FLM is OFF
0:00:01 - 0:00:42 - Found 0 records to push
0:00:00 - 0:00:42 - Done Pushing "gzm_Clients"

0:00:00 - 0:00:42 - Push Complete

0:00:00 - 0:00:42 - Starting Pull
0:00:00 - 0:00:42 - Starting to Pull "gzh_Clients"
0:00:00 - 0:00:42 - Last Time Zync: ""
0:00:00 - 0:00:42 - FLM is OFF
0:00:00 - 0:00:42 - Starting TO Filter - "gzh_Clients"
0:00:00 - 0:00:42 - Found 26 Records in the filter
0:00:00 - 0:00:42 - Looking for record to Delete
0:00:01 - 0:00:43 - no records to delete in "gzm_Clients"
0:00:00 - 0:00:43 - Deletion Complete
0:00:00 - 0:00:43 - Pulling all filtered records
0:00:00 - 0:00:43 - Starting sync on 26 records.
0:00:04 - 0:00:47 - ERROR: -2. There are no fields on the Layout: "gzh_Clients"
0:00:01 - 0:00:48 - Sync halted at record # 1 due to error. Incomplete changes were rolled back.
0:00:00 - 0:00:48 - Done Pulling "gzh_Clients"

0:00:00 - 0:00:48 - Pull Complete

0:00:00 - 0:00:48 - ENDING CLIENTS ROUND TRIP

Thank you for your time in advance

Your log says: There are no fields on the Layout: "gzh_Clients". Are you sure that isn't true? It's the fields that you put on this layout (and the corresponding "gzm_Clients" layout) that determines what fields GoZync will sync for you. If you haven't added fields to these layouts, then do that and try synching again. Let me know how that goes.

I rolled back to a previous save and progressed again

I have now have everything corrected except 1 Table that won't Sync. Still Trouble shooting.

If you can't figure out what's wrong, send your files to [email protected] and I'll help you find the problem. -Jeff

i just got this same error on my solution. I have already done several successful syncs. and yes the fields are on the layout

Would you mind posting your log?

jeffalmquist wrote:Would you mind posting your log?

sorry I didn't save it but it was identical except my table name of course. Have modified both mobile files in other places and it hasn't happened again. sorry for the unhelpful feedback If it happens again I will provide more detail.